Wall sign rules in Pearland
Allowed. 39 confirmed rules: permit required, maximum area, minimum clearance, illumination, electronic message limits, submit with the application, other limit.
Example: Maximum area10% (10% of the area of the building facade or lease space facade)Applies to: Office/professional and institutional uses“Office/professional and institutional uses may have signs with a total aggregate area of up to ten percent (10%) of the area of the building…”Sec. 4.2.5.2(a)(3)b · View source · last checked Nov 14, 2026 - Engineer-certified design. Permanent signs that need a sign permit must have their design certified by a professional engineer (Sec. 4.2.5.1(f)(2)); the checklist also asks for wind load calculations.
All wall sign figures for an addressChannel letters rules in Pearland
Allowed. 39 confirmed rules: permit required, maximum area, minimum clearance, illumination, electronic message limits, submit with the application, other limit.
Example: Maximum area10% (10% of the area of the building facade or lease space facade)Applies to: Office/professional and institutional uses“Office/professional and institutional uses may have signs with a total aggregate area of up to ten percent (10%) of the area of the building…”Sec. 4.2.5.2(a)(3)b · View source · last checked Nov 14, 2026 - Engineer-certified design. Permanent signs that need a sign permit must have their design certified by a professional engineer (Sec. 4.2.5.1(f)(2)); the checklist also asks for wind load calculations.
All channel letters figures for an addressMonument sign rules in Pearland
Allowed, with conditions. 70 confirmed rules: permit required, maximum area, maximum height, minimum clearance, number allowed, minimum setback, minimum spacing, illumination, electronic message limits, submit with the application, other limit.
Example: Maximum area300 sq ftApplies to: Multi-tenant or multi-user sign on property on State Highway 288 or Beltway 8, set back no more than 35 ft from that right-of-way“Three hundred (300) square feet, when erected on property located on State Highway 288 or Beltway 8 and said sign is not set back…”Sec. 4.2.5.4(b)(4)a · View source · last checked Nov 14, 2026 - Pole signs are prohibited. Freestanding signs on a single vertical support are prohibited (Sec. 4.2.5.1(c)(17)). Ground (monument) signs must sit on one solid base structure (Sec. 4.2.5.1).
- One business or several on the lot. A single-business lot gets an on-premise ground sign; a lot with more than one use or business must use a multi-tenant sign, with its own height, area, setback and spacing limits (Sec. 4.2.5.3(a), 4.2.5.4). A business with enough building frontage may have its own ground sign.
- State Highway 288 and Beltway 8. Multi-tenant signs and temporary signs have larger limits on State Highway 288 and Beltway 8 (Sec. 4.2.5.4, 4.2.5.5). Check whether the property fronts these highways.
- Engineer-certified design. Permanent signs that need a sign permit must have their design certified by a professional engineer (Sec. 4.2.5.1(f)(2)); the checklist also asks for wind load calculations.
All monument sign figures for an addressPole or pylon sign rules in Pearland
Not allowed. 2 confirmed rules: other limit.
- Pole signs are prohibited. Freestanding signs on a single vertical support are prohibited (Sec. 4.2.5.1(c)(17)). Ground (monument) signs must sit on one solid base structure (Sec. 4.2.5.1).
All pole or pylon sign figures for an addressBlade or projecting sign rules in Pearland
Allowed. 19 confirmed rules: permit required, maximum area, minimum clearance, number allowed, submit with the application, other limit.
Example: Maximum area2 sq ftApplies to: Blade sign“limited to 1 blade sign per public entrance where public foot traffic occurs, and limited to two square feet per face.”Sec. 5.1.1.1(500) · View source · last checked Nov 14, 2026 - Engineer-certified design. Permanent signs that need a sign permit must have their design certified by a professional engineer (Sec. 4.2.5.1(f)(2)); the checklist also asks for wind load calculations.
- Blade signs. Blade signs are limited by the UDC's definition (non-illuminated, with count and size limits); Division 5 has no blade-sign section of its own.
All blade or projecting sign figures for an addressAwning or canopy sign rules in Pearland
Allowed. 34 confirmed rules: permit required, maximum area, minimum clearance, illumination, electronic message limits, submit with the application, other limit.
Example: Maximum area10% (10% of the area of the building facade or lease space facade on which the signs are located)Applies to: Office/professional and institutional uses“Office/professional and institutional uses may have signs with a total aggregate area of up to ten percent (10%) of the area of the building…”Section 4.2.5.2(a)(3)b · View source · last checked Nov 14, 2026 - Engineer-certified design. Permanent signs that need a sign permit must have their design certified by a professional engineer (Sec. 4.2.5.1(f)(2)); the checklist also asks for wind load calculations.
All awning or canopy sign figures for an addressWindow sign rules in Pearland
11 confirmed rules: permit required, maximum area, illumination, electronic message limits, other limit.
Example: Maximum area20% (20% of the area of the building facade or lease space facade, all signs including window signs)Applies to: All other nonresidential uses (not office/professional or institutional); facade faces a street“All other nonresidential uses may have signs, including window signs, with a total aggregate area as follows: i. up to twenty percent (20%) of…”Sec. 4.2.5.2(a)(3)c · View source · last checked Nov 14, 2026 All window sign figures for an addressElectronic message sign rules in Pearland
Allowed, with conditions. 36 confirmed rules: permit required, maximum area, maximum height, illumination, electronic message limits, submit with the application, other limit.
Example: Maximum area25% (25% of the total allowable effective sign area)Applies to: ECMS (electronic changeable message sign) message board on a monument (ground) sign“The Electronic display (i.e., changeable message) portion of an electronic changeable message board sign shall not exceed twenty-five (25) percent of the total allowable…”Sec. 4.2.5.3(b)(7)b · View source · last checked Nov 14, 2026 - One business or several on the lot. A single-business lot gets an on-premise ground sign; a lot with more than one use or business must use a multi-tenant sign, with its own height, area, setback and spacing limits (Sec. 4.2.5.3(a), 4.2.5.4). A business with enough building frontage may have its own ground sign.
- Engineer-certified design. Permanent signs that need a sign permit must have their design certified by a professional engineer (Sec. 4.2.5.1(f)(2)); the checklist also asks for wind load calculations.
All electronic message sign figures for an addressTemporary banner rules in Pearland
Allowed, with conditions. 21 confirmed rules: permit required, maximum area, number allowed, submit with the application, other limit.
Example: Maximum area50 sq ft“Banner Signs: Unless otherwise provided, fifty (50) square feet.”Sec. 4.2.5.5(b)(3) · View source · last checked Nov 14, 2026 - State Highway 288 and Beltway 8. Multi-tenant signs and temporary signs have larger limits on State Highway 288 and Beltway 8 (Sec. 4.2.5.4, 4.2.5.5). Check whether the property fronts these highways.
All temporary banner figures for an address19 more lines could not be confirmed by our automatic checks, so no figures are shown for them. A lookup lists them with the section to check.