Coverage · Tomball, TX
Tomball, Texas sign rules
159 confirmed rules from the City of Tomball's sign code for 9 sign types, each quoted word for word with its code section and a link to the official source. Last checked Nov 14, 2026.
What the confirmed rules cover
Example: Maximum area300 sq ft“No Wall Sign may be extended above the roofline. No wall sign shall exceed 300 square feet.”4.02.J.2 · View source · last checked Nov 14, 2026
All wall sign figures for an addressChannel letters rules in Tomball
Example: Maximum area300 sq ftApplies to: Channel letters affixed to a building wall are Wall Signs ('Any sign affixed to or painted upon the wall of any building', 4.02.J.1); the code does not name channel letters“No Wall Sign may be extended above the roofline. No wall sign shall exceed 300 square feet.”4.02.J.2 · View source · last checked Nov 14, 2026
All channel letters figures for an addressMonument sign rules in Tomball
Example: Maximum area300 sq ft (300 sq ft + 50 sq ft for each entity identified on the sign in excess of five)Applies to: Two or more commercial entities sharing common off-street parking, pedestrian-ways and/or landscaping (even on separate lots)“One ground sign is permitted for each five entities, with a maximum sign area of 300 square feet plus 50 square feet for each…”4.02.E.2.c.i · View source · last checked Nov 14, 2026
- Ground sign size. The UDC sets ground sign area and height limits only for developments where several businesses share parking (4.02.E.2.c). For a single business lot it sets the number and spacing but no size; ask the Building Division.
Pole or pylon sign rules in Tomball
Example: Maximum area300 sq ftApplies to: Pole signs within 50 feet of a State Highway right-of-way line“Pole Signs are only permitted within 50 feet of a State Highway right -of-way line with a maximum area of 300 square feet and…”4.02.G.2 · View source · last checked Nov 14, 2026
All pole or pylon sign figures for an addressBlade or projecting sign rules in Tomball
Example: Minimum clearance6 ftNote: Measured horizontally from overhead electric conductors energized in excess of 750 volts“Signs shall be located at a minimum distance of six feet measured horizontally and 12 feet measured vertically from overhead electric conductors that are…”4.01.E.4 · View source · last checked Nov 14, 2026
All blade or projecting sign figures for an addressAwning or canopy sign rules in Tomball
Example: Minimum clearance6 ftNote: Measured horizontally from overhead electric conductors energized in excess of 750 volts“Signs shall be located at a minimum distance of six feet measured horizontally and 12 feet measured vertically from overhead electric conductors that are…”4.01.E.4 · View source · last checked Nov 14, 2026
All awning or canopy sign figures for an addressWindow sign rules in Tomball
Example: Maximum area50%“No Window Sign (or combination of Window Signs) may obscure
visibility through an individual window by more than 50 percent.”4.02.L.2 · View source · last checked Nov 14, 2026
All window sign figures for an addressElectronic message sign rules in Tomball
Example: Maximum area32 sq ftApplies to: Single business or use“All CEVMSs shall be limited to 32 square feet for a single business or use and 50 square feet for a multitenant business or…”4.02.M.2.b.v · View source · last checked Nov 14, 2026
- Old Town Area. Electronic message (CEVMS) signs are allowed only along state rights-of-way outside the Old Town Area, or for public schools; elsewhere only with City Council approval (UDC 4.02.M).
Temporary banner rules in Tomball
Example: Maximum area32 sq ft“A property shall be limited to one banner sign, with a maximum size of 32 square feet.”4.02.C.2 · View source · last checked Nov 14, 2026
All temporary banner figures for an address23 more lines could not be confirmed by our automatic checks, so no figures are shown for them. A lookup lists them with the section to check.
Before you file in Tomball
- New code since 2026Tomball replaced its old sign chapter (Chapter 34) with Article 4 of the Unified Development Code (Chapter 45, Ord. 2025-35, adopted 12/01/2025). Older handouts and the online Code of Ordinances may still show the repealed rules.
- Planned Development (PD) districtsA PD ordinance may set its own signage requirements (UDC 2.02). Ask the Building Division for the PD ordinance before ordering.
- Sign types not listed are prohibitedAny sign not specifically mentioned in Article 4 is prohibited unless approved by City Council (4.01.F.9).
- Sign permit feeThe city's Master Fee Schedule lists banner and electrical fees but no permit fee line for permanent signs. Ask the Building Division for the current fee.
- Zoning map uses older district namesThe city's online zoning layer still shows some pre-UDC district names (LI, MF, OT & MU). Check the district with the city if it matters.
Official sources
- Tomball Code Chapter 45, Unified Development Code (effective January 1, 2026), Article 4 Signs
- Tomball Master Fee Schedule FY 2026-2027 (effective October 1, 2026)
Permits: The City of Tomball sign permit office, (281) 290-1451. Zoning districts: Tomball zoning map.
Not legal advice. The city has the final say. Planned developments, master sign plans and special sign districts can override the general sign code. Check the linked section before you file.
Rules are extracted from official city documents by AI and checked automatically, not reviewed by a person. How the checks work